Your pavements should last long if installed properly. Whether in your home or commercial space, you shouldn't worry about constantly repairing your pavements. However, this doesn't mean your pavements are damage-proof. Over time, your pavements may develop cracks and other damage that may call for repair. And when this happens, you must pay special attention to the repair method you choose. Typically, most pavement repairs involve removing the existing asphalt layer and adding a fresh asphalt mix. While this will often depend on the degree of damage, foam bitumen stabilisation is a much better alternative. Foamed bitumen is a mixture of bitumen, water and air. Stabilising your pavement using foamed bitumen has many advantages, and here are some of the ways you will benefit from using it.

Time-Saving Benefits

Speed is one of the top benefits of using foam bitumen stabilisation for your paving repairs. First, the technique does not involve the traditional process of excavating the damaged sections first and making repairs from the sub-base. Instead, foam bitumen stabilisation entails pouring hot bitumen over the damaged sections of the pavement and driving it into the asphalt using a compactor. Typically, this process is less time-consuming than conventional pavement repair techniques.

In addition, compared to other methods like overlays, foam bitumen stabilisation is typically done in-situ, making it quicker. Generally, pavement repairs can cause delays for pavement users, which can be inconvenient, especially in commercial premises. Therefore, to avoid such delays and inconveniences, consider foam bitumen stabilisation because it can be done much faster.

Strength And Durability

It's essential to choose a repair solution that can last because regular repairs can be expensive. Foam bitumen stabilisation creates flexible, strong, and durable pavement layers, making it one of the most suitable pavement repair options to consider.

Improved Moisture Resistance

Moisture is one of the top contributors to pavement damage. Traditional repair methods tend to be more susceptible to moisture damage. That's because naturally eliminating air pockets in the sub-base can be challenging. While the air pockets may be tiny, they can allow water to penetrate your sub-base, causing moisture damage over time. On the other hand, the foam bitumen stabilisation process works to seal any air pockets in the sub-base. First, the foam bitumen is poured over the asphalt surface before it's compacted. The compaction ensures the foam bitumen penetrates deep into any air pockets or cavities in the sub-base, sealing them and enhancing the pavement's insusceptibility to moisture.

Reach out to a professional for foam bitumen stabilisation